When parsing command line arguments, no pair of command line options can
ever match simultaneously. Use "else if" blocks to reflect this. This
change improves both readability and speed.
Signed-off-by: Lukas Fleischer <cgit@cryptocrack.de>
This is a preparation for replacing all prefix checks with either
strip_prefix() or starts_with() when Git 1.8.6 is released.
Signed-off-by: Lukas Fleischer <cgit@cryptocrack.de>
* Name "cgit Development Team" as copyright holder to avoid listing
every single developer.
* Update copyright ranges.
Signed-off-by: Lukas Fleischer <cgit@crytocrack.de>
Pages like /commit?h=wip&id=8a335ce618ba77fbf05148d6f8be17bd48ba4340
were being marked as dynamic, because of h=wip, when it should be
static, because of id=.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
We've long supported negative ttls, for infinite cache, except the
documentation incorrectly showed one of our defaults as being 5 and not
-1. As well, with a negative ttl, we were actually making the HTTP
expired header go backwards. This changes it to go ahead ten years
instead.
Further, we add an cache-about-ttl option to set a different ttl for
about pages, which are now increasingly being filtered through markdown
or just sent statically anyway.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Now this is possible in cgitrc -
readme=:README.md
readme=:readme.md
readme=:README.mkd
readme=:readme.mkd
readme=:README.rst
readme=:readme.rst
readme=:README.html
readme=:readme.html
readme=:README.htm
readme=:readme.htm
readme=:README.txt
readme=:readme.txt
readme=:README
readme=:readme
readme=:INSTALL.txt
readme=:install.txt
readme=:INSTALL
readme=:install
Suggested-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
The readme variable may now contain multiple space deliminated entries,
which per usual are either a filepath or a git ref filepath. If multiple
are specified, cgit will now select the first one in the list that
exists. This is to make it easier to specify multiple default readme
types in the main cgitrc file and have them automatically get applied to
each repo based on what exists.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
This gives the about-filter API the same semantics as source-filter,
where the filter receives the filename so it can decide what to do next
with it.
While we're at it, plug a memory leak.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
The number of odd cases in which git will try to read config is far too
great to keep putting a bandaid over each one, so we'll just unset it.
If it turns out that scripts really liked to know about $HOME, we can
always reset it in the filter forks.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
We've now added quite a few config keys for repositories, but we've
forgotten to update the printing of it for cache files. Synchronize the
two.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
When set to "name", branches are sorted by name, which is the current
default. When set to "age", branches are sorted by the age of the
repository.
This feature was requested by Konstantin Ryabitsev for use on
kernel.org.
Proposed-by: Konstantin Ryabitsev <mricon@kernel.org>
getenv() returns a NULL pointer if the specified variable name cannot be
found in the environment. However, some setenv() implementations crash
if a NULL pointer is passed as second argument. Only restore variables
that are not NULL.
See commit d96d2c98eb for a related patch.
Signed-off-by: Lukas Fleischer <cgit@cryptocrack.de>
While doing any kind of git loading, unset HOME variables and set
NOSYSTEM variables so that cgit does not load any settings that a user
may have set for his own /usr/bin/git usage.
This fixes a fatal error introduced with git 1.8, whereupon git would
fatally exit when failing to access particular files.
The result of this is that only repo-local configuration files are
accessed:
zx2c4@thinkpad ~/Projects/cgit $ HOME=/root QUERY_STRING="url=foo/log"
CGIT_CONFIG=tests/trash/cgitrc strace -e access ./cgit >/dev/null
access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory)
access("repos/foo/.git/objects", X_OK) = 0
access("repos/foo/.git/refs", X_OK) = 0
access("repos/foo/.git/config", R_OK) = 0
access("repos/foo/.git/config", R_OK) = 0
access("repos/foo/.git/objects/b3/bafdbf0183f4897ef8b1319cb8c490ed54717e", F_OK) = 0
access("repos/foo/.git/objects/b3/bafdbf0183f4897ef8b1319cb8c490ed54717e", F_OK) = 0
access("repos/foo/.git/objects/b3/bafdbf0183f4897ef8b1319cb8c490ed54717e", F_OK) = 0
access("repos/foo/.git/objects/b3/bafdbf0183f4897ef8b1319cb8c490ed54717e", F_OK) = 0
+++ exited with 0 +++
Reported-by: Ferry Huberts <ferry.huberts@pelagic.nl>
Tested-by: Jason A. Donenfeld <Jason@zx2c4.com>
Tested-by: Ferry Huberts <ferry.huberts@pelagic.nl>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Use "struct strbuf" from Git to remove the limit on file path length.
Notes on scan-tree:
This is slightly involved since I decided to pass the strbuf into
add_repo() and modify if whenever a new file name is required, which
should avoid any extra allocations within that function. The pattern
there is to append the filename, use it and then reset the buffer to its
original length (retaining a trailing '/').
Notes on ui-snapshot:
Since write_archive modifies the argv array passed to it we
copy the argv_array values into a new array of char* and then free the
original argv_array structure and the new array without worrying about
what the values now look like.
Signed-off-by: John Keeping <john@keeping.me.uk>
This removes many uses of "fmt" which uses a fixed size static pool of
fixed size buffers. Instead of relying on these, we now pass around
argument lists for as long as possible before using a strbuf to render
content of an arbitrary size.
Signed-off-by: John Keeping <john@keeping.me.uk>
The CGit configuration variable virtual_root is normalized so that it
does not have a trailing '/' character, but it is allowed to be empty
(the empty string and NULL have different meanings here) and there is
code that is insufficiently cautious when checking if it ends in a '/':
if (virtual_root[strlen(virtual_root) - 1] != '/')
Clearly this check is redundant, but rather than simply removing it we
get a slight efficiency improvement by switching the normalization so
that the virtual_root variable always ends in '/'. Do this with a new
"ensure_end" helper.
Signed-off-by: John Keeping <john@keeping.me.uk>
This reverts the memory duplication introduced in commit 60a2627, while
keeping everything else that has been cleaned up. The environment
variables are never modified, so we do not need to call xstrdupn() here.
Also, remove xstrdupn() which is no longer needed.
Signed-off-by: Lukas Fleischer <cgit@cryptocrack.de>
These reflect the values of environment variables and should never be
changed. Add another xstrdup() when we assign environment variables to
strings that are potentially non-constant.
Signed-off-by: Lukas Fleischer <cgit@cryptocrack.de>
Fixes following memory leak seen with "PATH_INFO=/cgit/refs/":
==13408== 7 bytes in 1 blocks are definitely lost in loss record 4 of 52
==13408== at 0x4C2C04B: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==13408== by 0x56F2DF1: strdup (in /usr/lib/libc-2.17.so)
==13408== by 0x46CA78: xstrdup (wrapper.c:35)
==13408== by 0x405840: find_current_ref (cgit.c:426)
==13408== by 0x44BE5A: do_one_ref (refs.c:527)
==13408== by 0x44D3E0: do_for_each_ref_in_dir (refs.c:553)
==13408== by 0x44D85A: do_for_each_ref (refs.c:1298)
==13408== by 0x405889: find_default_branch (cgit.c:438)
==13408== by 0x405AC4: prepare_repo_cmd (cgit.c:490)
==13408== by 0x405D97: process_request (cgit.c:557)
==13408== by 0x407490: cache_process (cache.c:322)
==13408== by 0x406C18: main (cgit.c:864)
Signed-off-by: Lukas Fleischer <cgit@cryptocrack.de>
* Remove whitespace at the end of lines.
* Replace space indentation by tabs.
* Add whitespace before/after several operators ("+", "-", "*", ...)
* Add whitespace to assignments ("foo = bar;").
* Fix whitespace in parameter lists ("foobar(foo, bar, 42)").
Signed-off-by: Lukas Fleischer <cgit@cryptocrack.de>
This is not really needed for personal sites where all repos belong to
the same person. Since it is pretty useful for shared sites however, it
should be configurable.
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
This makes it possible to use strict commit date ordering or strict
topological ordering by passing the corresponding flags to "git log".
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Flag which, when set to "1", will sort the sections on the repository
listing by name. Set this flag to "0" if the order in the cgitrc file
should be preserved. Default value: "1".
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
After some back and forth with Jamie and René, it looks like the git
config semantics are going to be like this:
- gitweb.category maps to the cgit repo config key "section"
- gitweb.description maps to the cgit repo config key "desc"
- gitweb.owner maps to the cgit repo config key "owner"
- cgit.* maps to all cgit repo config keys
This option can be enabled with "enable-git-config=1", and replaces
all previous "enable-gitweb-*" config keys.
The order of operations is as follows:
- git config settings are applied in the order that they exist in
the git config file
- if the owner is not set from git config, get the owner using the
usual getpwuid call
- if the description is not set from git config, look inside the
static $path/description file
- if section-from-path=1, override whatever previous settings were
inside of git config using the section-from-path logic
- parse $path/cgitrc for local repo.* settings, that override all
previous settings
This makes it possible to activate the enable_commit_graph,
enable_log_filecount, and enable_log_linecount for individual
repositories, even if the global setting is "0" (default).
The commit that introduced the broken behavior was e189344, and the
commit message of that makes it clear that this wasn't the intended
behavior.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Add two options, one for doing the ordinary name sorts in a
case-insensitive manner, and another for choosing to sort repos in each
section by age instead of by name.
When side-by-side-diffs=1 was set in cgitrc, specyfing 'ss=0' in the query-
string would not switch to unified diffs. This patch fixes the issue by
introducing a separate variable to track the occurrence of "ss" in the
querystring.
For sites that do not want to configure mime types by hand but
still want the correct mime type for 'plain' blobs, configuring
a mime type file is made possible. This is handy since such a
file is normally already provided (at least on Linux systems).
Also, this reflects the gitweb option '$mimetypes_file'
Signed-off-by: Ferry Huberts <ferry.huberts@pelagic.nl>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
The resolve_ref() function handles reading of git- and filesystem
symbolic links (including proper whitespace trimming) and packed refs.
There's no point in reimplementing this function in cgit.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
There's no need to invoke guess_defbranch() for each repo during
scan-path, since repo.defbranch is only used when repo content is
being displayed.
Also, some users prefer to register their projects manually in cgitrc
but they got no benefit from the new repo.defbranch handling.
This patch tries to rectify these issues by only invoking guess_defbranch()
when needed, regardless of how the repo was registered.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
The current 'Not a git repository' error message is not very helpful,
since it doesn't state the cause of the problem.
This patch uses errno to provide a hint of the underlying problem. It
would have been even better to give the exact cause (e.g. for ENOENT it
would be nice to know which file/directory is missing), but that would
require reimplementing setup_git_directory_gently() which seems a bit
overkill.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
The old default value was an abomination which never should have been
allowed to see the light of day.
This patch removes the default, which is a backwards incompatible change
with low probability of causing anyone any real trouble (a repo with
submodules, displayed by cgit using the default value of `module-link`,
is very unlikely to actually generate working links).
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
The current 'repo.module-link' option is sufficient when all gitlinks
in a repository can be converted to commit links in a uniform way, but
not when different submodules/paths needs different settings.
This patch adds support for 'repo.module-link.<path>', which will be
used for linking to submodules at paths matching one such entry.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
The current 'clone-prefix' setting has some known issues:
* All repos get the same 'clone-prefix' value since the setting is not
adopted during repo registration (in cgitrc, or during scan-path traversal),
but only when the setting is used.
* The generated clone-urls for a repo is a combination of 'clone-prefix', a
slash and the repo url. This doesn't work well with e.g. ssh-style urls
like 'git@example.org:repo.git', since the inserted slash will make the
repo relative to the filesystem root.
* If 'remove-suffix' is enabled, the generated clone-urls will not work for
cloning (except for http-urls to cgit itself) since they miss the '.git'
suffix.
The new 'clone-url' setting is designed to avoid the mentioned issues:
* Each repo adopts the default 'clone-url' when the repo is defined. This
allows different groups of repos to adopt different values.
* The clone-urls for a repo is generated by expanding environment variables
in a string template without inserting arbitrary characters, hence any
kind of clone-url can be generated.
* Macro expansion also eases the 'remove-suffix' pain since it's now
possible to define e.g. 'clone-url=git://foo.org/$CGIT_REPO_URL.git' for
a set of repos. A furter improvement would be to define e.g.
$CGIT_REPO_SUFFIX to '.git' for all repos which had their url prettified,
or to store the original $CGIT_REPO_URL in e.g. $CGIT_REPO_REAL_URL before
suffix removal.
Reviewed-by: Ferry Huberts <mailings@hupie.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
When cgit learned to setup environment variables for certain repo
settings before invoking a filter process, the setup occurred inside
cgit_open_filter().
This patch moves the setup out of cgit_open_filter() and into
prepare_repo_cmd() to prepare for additional uses of these variables.
Reviewed-by: Ferry Huberts <mailings@hupie.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
