/* * BIRD -- Table-to-Table Routing Protocol a.k.a Pipe * * (c) 1999--2000 Martin Mares * * Can be freely distributed and used under the terms of the GNU GPL. */ /** * DOC: Pipe * * The Pipe protocol is very simple. It just connects to two routing tables * using proto_add_announce_hook() and whenever it receives a rt_notify() * about a change in one of the tables, it converts it to a rte_update() * in the other one. * * To avoid pipe loops, Pipe keeps a `being updated' flag in each routing * table. * * A pipe has two announce hooks, the first connected to the main * table, the second connected to the peer table. When a new route is * announced on the main table, it gets checked by an export filter in * ahook 1, and, after that, it is announced to the peer table via * rte_update(), an import filter in ahook 2 is called. When a new * route is announced in the peer table, an export filter in ahook2 * and an import filter in ahook 1 are used. Oviously, there is no * need in filtering the same route twice, so both import filters are * set to accept, while user configured 'import' and 'export' filters * are used as export filters in ahooks 2 and 1. Route limits are * handled similarly, but on the import side of ahooks. */ #undef LOCAL_DEBUG #include "nest/bird.h" #include "nest/iface.h" #include "nest/protocol.h" #include "nest/route.h" #include "nest/cli.h" #include "conf/conf.h" #include "filter/filter.h" #include "lib/string.h" #include "pipe.h" #ifdef CONFIG_BGP #include "proto/bgp/bgp.h" #endif static void pipe_rt_notify(struct proto *P, struct channel *src_ch, const net_addr *n, rte *new, const rte *old) { struct pipe_proto *p = (void *) P; struct channel *dst = (src_ch == p->pri) ? p->sec : p->pri; if (!new && !old) return; if (new) { rta *a = alloca(rta_size(new->attrs)); memcpy(a, new->attrs, rta_size(new->attrs)); a->cached = 0; a->hostentry = NULL; rte e0 = { .attrs = a, .src = new->src, .generation = new->generation + 1, }; rte_update(dst, n, &e0, new->src); } else rte_update(dst, n, NULL, old->src); } static int pipe_preexport(struct channel *c, rte *e) { struct pipe_proto *p = (void *) c->proto; /* Avoid direct loopbacks */ if (e->sender == c->in_req.hook) return -1; /* Indirection check */ uint max_generation = ((struct pipe_config *) p->p.cf)->max_generation; if (e->generation >= max_generation) { log_rl(&p->rl_gen, L_ERR "Route overpiped (%u hops of %u configured in %s) in table %s: %N %s/%u:%u", e->generation, max_generation, c->proto->name, c->table->name, e->net, e->src->proto->name, e->src->private_id, e->src->global_id); return -1; } return 0; } static void pipe_reload_routes(struct channel *C) { struct pipe_proto *p = (void *) C->proto; /* Route reload on one channel is just refeed on the other */ channel_request_feeding((C == p->pri) ? p->sec : p->pri); } static void pipe_postconfig(struct proto_config *CF) { struct pipe_config *cf = (void *) CF; struct channel_config *cc = proto_cf_main_channel(CF); if (!cc->table) cf_error("Primary routing table not specified"); if (!cf->peer) cf_error("Secondary routing table not specified"); if (cc->table == cf->peer) cf_error("Primary table and peer table must be different"); if (cc->table->addr_type != cf->peer->addr_type) cf_error("Primary table and peer table must have the same type"); if (cc->rx_limit.action) cf_error("Pipe protocol does not support receive limits"); if (cc->in_keep_filtered) cf_error("Pipe protocol prohibits keeping filtered routes"); cc->debug = cf->c.debug; } static int pipe_configure_channels(struct pipe_proto *p, struct pipe_config *cf) { struct channel_config *cc = proto_cf_main_channel(&cf->c); struct channel_config pri_cf = { .name = "pri", .channel = cc->channel, .table = cc->table, .out_filter = cc->out_filter, .in_limit = cc->in_limit, .ra_mode = RA_ANY, .debug = cc->debug, .rpki_reload = cc->rpki_reload, }; struct channel_config sec_cf = { .name = "sec", .channel = cc->channel, .table = cf->peer, .out_filter = cc->in_filter, .in_limit = cc->out_limit, .ra_mode = RA_ANY, .debug = cc->debug, .rpki_reload = cc->rpki_reload, }; return proto_configure_channel(&p->p, &p->pri, &pri_cf) && proto_configure_channel(&p->p, &p->sec, &sec_cf); } static struct proto * pipe_init(struct proto_config *CF) { struct proto *P = proto_new(CF); struct pipe_proto *p = (void *) P; struct pipe_config *cf = (void *) CF; P->rt_notify = pipe_rt_notify; P->preexport = pipe_preexport; P->reload_routes = pipe_reload_routes; p->rl_gen = (struct tbf) TBF_DEFAULT_LOG_LIMITS; pipe_configure_channels(p, cf); return P; } static int pipe_reconfigure(struct proto *P, struct proto_config *CF) { struct pipe_proto *p = (void *) P; struct pipe_config *cf = (void *) CF; return pipe_configure_channels(p, cf); } static void pipe_copy_config(struct proto_config *dest UNUSED, struct proto_config *src UNUSED) { /* Just a shallow copy, not many items here */ } static void pipe_get_status(struct proto *P, byte *buf) { struct pipe_proto *p = (void *) P; bsprintf(buf, "%s <=> %s", p->pri->table->name, p->sec->table->name); } static void pipe_show_stats(struct pipe_proto *p) { struct channel_import_stats *s1i = &p->pri->import_stats; struct channel_export_stats *s1e = &p->pri->export_stats; struct channel_import_stats *s2i = &p->sec->import_stats; struct channel_export_stats *s2e = &p->sec->export_stats; struct rt_import_stats *rs1i = p->pri->in_req.hook ? &p->pri->in_req.hook->stats : NULL; struct rt_export_stats *rs1e = p->pri->out_req.hook ? &p->pri->out_req.hook->stats : NULL; struct rt_import_stats *rs2i = p->sec->in_req.hook ? &p->sec->in_req.hook->stats : NULL; struct rt_export_stats *rs2e = p->sec->out_req.hook ? &p->sec->out_req.hook->stats : NULL; u32 pri_routes = p->pri->in_limit.count; u32 sec_routes = p->sec->in_limit.count; /* * Pipe stats (as anything related to pipes) are a bit tricky. There * are two sets of stats - s1 for ahook to the primary routing and * s2 for the ahook to the secondary routing table. The user point * of view is that routes going from the primary routing table to * the secondary routing table are 'exported', while routes going in * the other direction are 'imported'. * * Each route going through a pipe is, technically, first exported * to the pipe and then imported from that pipe and such operations * are counted in one set of stats according to the direction of the * route propagation. Filtering is done just in the first part * (export). Therefore, we compose stats for one directon for one * user direction from both import and export stats, skipping * immediate and irrelevant steps (exp_updates_accepted, * imp_updates_received, imp_updates_filtered, ...). * * Rule of thumb is that stats s1 have the correct 'polarity' * (imp/exp), while stats s2 have switched 'polarity'. */ cli_msg(-1006, " Routes: %u imported, %u exported", pri_routes, sec_routes); cli_msg(-1006, " Route change stats: received rejected filtered ignored accepted"); cli_msg(-1006, " Import updates: %10u %10u %10u %10u %10u", rs2e->updates_received, s2e->updates_rejected + s1i->updates_invalid, s2e->updates_filtered, rs1i->updates_ignored, rs1i->updates_accepted); cli_msg(-1006, " Import withdraws: %10u %10u --- %10u %10u", rs2e->withdraws_received, s1i->withdraws_invalid, rs1i->withdraws_ignored, rs1i->withdraws_accepted); cli_msg(-1006, " Export updates: %10u %10u %10u %10u %10u", rs1e->updates_received, s1e->updates_rejected + s2i->updates_invalid, s1e->updates_filtered, rs2i->updates_ignored, rs2i->updates_accepted); cli_msg(-1006, " Export withdraws: %10u %10u --- %10u %10u", rs1e->withdraws_received, s2i->withdraws_invalid, rs2i->withdraws_ignored, rs2i->withdraws_accepted); } static void pipe_show_proto_info(struct proto *P) { struct pipe_proto *p = (void *) P; cli_msg(-1006, " Channel %s", "main"); cli_msg(-1006, " Table: %s", p->pri->table->name); cli_msg(-1006, " Peer table: %s", p->sec->table->name); cli_msg(-1006, " Import state: %s", rt_export_state_name(rt_export_get_state(p->sec->out_req.hook))); cli_msg(-1006, " Export state: %s", rt_export_state_name(rt_export_get_state(p->pri->out_req.hook))); cli_msg(-1006, " Import filter: %s", filter_name(p->sec->out_filter)); cli_msg(-1006, " Export filter: %s", filter_name(p->pri->out_filter)); channel_show_limit(&p->pri->in_limit, "Import limit:", (p->pri->limit_active & (1 << PLD_IN)), p->pri->limit_actions[PLD_IN]); channel_show_limit(&p->sec->in_limit, "Export limit:", (p->sec->limit_active & (1 << PLD_IN)), p->sec->limit_actions[PLD_IN]); if (P->proto_state != PS_DOWN) pipe_show_stats(p); } void pipe_update_debug(struct proto *P) { struct pipe_proto *p = (void *) P; p->pri->debug = p->sec->debug = p->p.debug; } struct protocol proto_pipe = { .name = "Pipe", .template = "pipe%d", .class = PROTOCOL_PIPE, .proto_size = sizeof(struct pipe_proto), .config_size = sizeof(struct pipe_config), .postconfig = pipe_postconfig, .init = pipe_init, .reconfigure = pipe_reconfigure, .copy_config = pipe_copy_config, .get_status = pipe_get_status, .show_proto_info = pipe_show_proto_info };