/* * BIRD -- Babel Configuration * * Copyright (c) 2015-2016 Toke Hoiland-Jorgensen * (c) 2016--2017 Ondrej Zajicek * (c) 2016--2017 CZ.NIC z.s.p.o. * * Can be freely distributed and used under the terms of the GNU GPL. */ CF_HDR #include "proto/babel/babel.h" #include "nest/iface.h" CF_DEFINES #define BABEL_CFG ((struct babel_config *) this_proto) #define BABEL_IFACE ((struct babel_iface_config *) this_ipatt) CF_DECLS CF_KEYWORDS(BABEL, INTERFACE, METRIC, RXCOST, HELLO, UPDATE, INTERVAL, PORT, TYPE, WIRED, WIRELESS, RX, TX, BUFFER, PRIORITY, LENGTH, CHECK, LINK, NEXT, HOP, IPV4, IPV6, BABEL_METRIC, SHOW, INTERFACES, NEIGHBORS, ENTRIES, RANDOMIZE, ROUTER, ID, AUTHENTICATION, NONE, MAC, PERMISSIVE, EXTENDED, TUNNEL, RTT, MIN, MAX, DECAY, SEND, TIMESTAMPS, COST, DELAY, PKT, LOGGING, RATE, BURST) CF_GRAMMAR proto: babel_proto ; babel_proto_start: proto_start BABEL { this_proto = proto_config_new(&proto_babel, $1); init_list(&BABEL_CFG->iface_list); BABEL_CFG->hold_time = 1 S_; BABEL_CFG->log_pkt_tbf.rate = 1; BABEL_CFG->log_pkt_tbf.burst = 5; }; babel_proto_item: proto_item | proto_channel | INTERFACE babel_iface | RANDOMIZE ROUTER ID bool { BABEL_CFG->randomize_router_id = $4; } | LOGGING RATE PKT expr expr { BABEL_CFG->log_pkt_tbf.rate = $4; BABEL_CFG->log_pkt_tbf.burst = $5; } ; babel_proto_opts: /* empty */ | babel_proto_opts babel_proto_item ';' ; babel_proto: babel_proto_start proto_name '{' babel_proto_opts '}'; babel_iface_start: { this_ipatt = cfg_allocz(sizeof(struct babel_iface_config)); add_tail(&BABEL_CFG->iface_list, NODE this_ipatt); init_list(&this_ipatt->ipn_list); reset_passwords(); BABEL_IFACE->port = BABEL_PORT; BABEL_IFACE->type = BABEL_IFACE_TYPE_WIRED; BABEL_IFACE->limit = BABEL_HELLO_LIMIT; BABEL_IFACE->tx_tos = IP_PREC_INTERNET_CONTROL; BABEL_IFACE->tx_priority = sk_priority_control; BABEL_IFACE->rtt_min = BABEL_RTT_MIN; BABEL_IFACE->rtt_max = BABEL_RTT_MAX; BABEL_IFACE->rtt_decay = BABEL_RTT_DECAY; BABEL_IFACE->rtt_send = 1; BABEL_IFACE->check_link = 1; BABEL_IFACE->ext_next_hop = 1; }; babel_iface_finish: { if (BABEL_IFACE->type == BABEL_IFACE_TYPE_WIRELESS) { if (!BABEL_IFACE->hello_interval) BABEL_IFACE->hello_interval = BABEL_HELLO_INTERVAL_WIRELESS; if (!BABEL_IFACE->rxcost) BABEL_IFACE->rxcost = BABEL_RXCOST_WIRELESS; } else { if (!BABEL_IFACE->hello_interval) BABEL_IFACE->hello_interval = BABEL_HELLO_INTERVAL_WIRED; if (!BABEL_IFACE->rxcost) BABEL_IFACE->rxcost = BABEL_RXCOST_WIRED; if (BABEL_IFACE->type == BABEL_IFACE_TYPE_TUNNEL && !BABEL_IFACE->rtt_cost) BABEL_IFACE->rtt_cost = BABEL_RXCOST_RTT; } if (BABEL_IFACE->rtt_cost && !BABEL_IFACE->rtt_send) cf_error("Can't set RTT cost when sending timestamps is disabled"); if (BABEL_IFACE->rtt_min >= BABEL_IFACE->rtt_max) cf_error("Min RTT must be smaller than max RTT"); /* Make sure we do not overflow the 16-bit centisec fields */ if (!BABEL_IFACE->update_interval) BABEL_IFACE->update_interval = MIN_(BABEL_IFACE->hello_interval*BABEL_UPDATE_INTERVAL_FACTOR, BABEL_MAX_INTERVAL); BABEL_IFACE->ihu_interval = MIN_(BABEL_IFACE->hello_interval*BABEL_IHU_INTERVAL_FACTOR, BABEL_MAX_INTERVAL); BABEL_CFG->hold_time = MAX_(BABEL_CFG->hold_time, BABEL_IFACE->update_interval*BABEL_HOLD_TIME_FACTOR); BABEL_IFACE->passwords = get_passwords(); if (!BABEL_IFACE->auth_type != !BABEL_IFACE->passwords) cf_error("Authentication and password options should be used together"); if (BABEL_IFACE->passwords) { struct password_item *pass; uint len = 0, i = 0; WALK_LIST(pass, *BABEL_IFACE->passwords) { /* Set default crypto algorithm (HMAC-SHA256) */ if (!pass->alg) pass->alg = ALG_HMAC_SHA256; if (!((pass->alg & ALG_HMAC) || (pass->alg == ALG_BLAKE2S_128) || (pass->alg == ALG_BLAKE2S_256) || (pass->alg == ALG_BLAKE2B_256) || (pass->alg == ALG_BLAKE2B_512))) cf_error("Only HMAC and Blake2 algorithms are supported"); len += mac_type_length(pass->alg); i++; } BABEL_IFACE->mac_num_keys = i; BABEL_IFACE->mac_total_len = len; } }; babel_iface_item: | PORT expr { BABEL_IFACE->port = $2; if (($2<1) || ($2>65535)) cf_error("Invalid port number"); } | RXCOST expr { BABEL_IFACE->rxcost = $2; if (($2<1) || ($2>65535)) cf_error("Invalid rxcost"); } | LIMIT expr { BABEL_IFACE->limit = $2; if (($2<1) || ($2>16)) cf_error("Limit must be in range 1-16"); } | TYPE WIRED { BABEL_IFACE->type = BABEL_IFACE_TYPE_WIRED; } | TYPE WIRELESS { BABEL_IFACE->type = BABEL_IFACE_TYPE_WIRELESS; } | TYPE TUNNEL { BABEL_IFACE->type = BABEL_IFACE_TYPE_TUNNEL; } | HELLO INTERVAL expr_us { BABEL_IFACE->hello_interval = $3; if (($3BABEL_MAX_INTERVAL)) cf_error("Hello interval must be in range 10 ms - 655 s"); } | UPDATE INTERVAL expr_us { BABEL_IFACE->update_interval = $3; if (($3BABEL_MAX_INTERVAL)) cf_error("Update interval must be in range 10 ms - 655 s"); } | RX BUFFER expr { BABEL_IFACE->rx_buffer = $3; if (($3<256) || ($3>65535)) cf_error("RX buffer must be in range 256-65535"); } | TX LENGTH expr { BABEL_IFACE->tx_length = $3; if (($3<256) || ($3>65535)) cf_error("TX length must be in range 256-65535"); } | TX tos { BABEL_IFACE->tx_tos = $2; } | TX PRIORITY expr { BABEL_IFACE->tx_priority = $3; } | CHECK LINK bool { BABEL_IFACE->check_link = $3; } | NEXT HOP IPV4 ipa { BABEL_IFACE->next_hop_ip4 = $4; if (!ipa_is_ip4($4)) cf_error("Must be an IPv4 address"); } | NEXT HOP IPV6 ipa { BABEL_IFACE->next_hop_ip6 = $4; if (!ipa_is_ip6($4)) cf_error("Must be an IPv6 address"); } | EXTENDED NEXT HOP bool { BABEL_IFACE->ext_next_hop = $4; } | AUTHENTICATION NONE { BABEL_IFACE->auth_type = BABEL_AUTH_NONE; } | AUTHENTICATION MAC { BABEL_IFACE->auth_type = BABEL_AUTH_MAC; BABEL_IFACE->auth_permissive = 0; } | AUTHENTICATION MAC PERMISSIVE { BABEL_IFACE->auth_type = BABEL_AUTH_MAC; BABEL_IFACE->auth_permissive = 1; } | RTT MIN expr_us { BABEL_IFACE->rtt_min = $3; } | RTT MAX expr_us { BABEL_IFACE->rtt_max = $3; } | RTT COST expr { BABEL_IFACE->rtt_cost = $3; if ($3 >= BABEL_INFINITY) cf_error("RTT cost must be < 65535"); } | RTT DECAY expr { BABEL_IFACE->rtt_decay = $3; if (($3 < 1) || ($3 > 256)) cf_error("RTT decay must be between 1-256"); } | SEND TIMESTAMPS bool { BABEL_IFACE->rtt_send = $3; } | password_list ; babel_iface_opts: /* empty */ | babel_iface_opts babel_iface_item ';' ; babel_iface_opt_list: /* empty */ | '{' babel_iface_opts '}' ; babel_iface: babel_iface_start iface_patt_list_nopx babel_iface_opt_list babel_iface_finish; dynamic_attr: BABEL_METRIC { $$ = f_new_dynamic_attr(EAF_TYPE_INT, T_INT, EA_BABEL_METRIC); } ; CF_CLI_HELP(SHOW BABEL, ..., [[Show information about Babel protocol]]); CF_CLI(SHOW BABEL INTERFACES, optproto opttext, [] [\"\"], [[Show information about Babel interfaces]]) { PROTO_WALK_CMD($4, &proto_babel, p) babel_show_interfaces(p, $5); }; CF_CLI(SHOW BABEL NEIGHBORS, optproto opttext, [] [\"\"], [[Show information about Babel neighbors]]) { PROTO_WALK_CMD($4, &proto_babel, p) babel_show_neighbors(p, $5); }; CF_CLI(SHOW BABEL ENTRIES, optproto opttext, [], [[Show information about Babel prefix entries]]) { PROTO_WALK_CMD($4, &proto_babel, p) babel_show_entries(p); }; CF_CLI(SHOW BABEL ROUTES, optproto opttext, [], [[Show information about Babel route entries]]) { PROTO_WALK_CMD($4, &proto_babel, p) babel_show_routes(p); }; CF_CODE CF_END