Ondrej Filip
d8c7d9e884
Since now I can also use 'dead interval', not just 'dead counter'.
2005-02-20 04:27:56 +00:00
Ondrej Filip
60e04f0413
Minor bugfix: Summary LSA for aggregated area was always propagated with
...
metric = 1. Now it's metric of most distant component.
2005-02-18 18:51:42 +00:00
Ondrej Filip
9912fa51c8
Bugfix - cost of interface can be larger than 0xffff
2005-02-12 22:18:48 +00:00
Ondrej Filip
8d94a524b6
Added handling of STUB bool.
2004-07-16 08:27:11 +00:00
Ondrej Filip
86c84d76b7
Huge OSPF database redesign. Since now, all LSAs of all areas
...
are in single database. This avoids duplication of external LSAs and
fixes bug in external LSA distribution.
2004-07-15 16:37:52 +00:00
Ondrej Filip
3b16080c97
Multiple OSPF areas can be attached.
...
Origination of summary LSA works.
Routing table calculation works.
Virtual links works.
Well, I hope, OSPF is fully compatible with RFC2328!!!!
2004-07-14 21:46:20 +00:00
Ondrej Filip
62eee82321
Default tick = 1. The today's CPU is fast enough.
2004-07-13 21:27:33 +00:00
Ondrej Filip
621ccdfe5a
Bugfix - options bits were not included in LSAs
...
Bugfix - E bit was not unset on stub areas.
2004-07-13 11:58:50 +00:00
Ondrej Filip
3e2bd0f17a
Md5 authentification added (unsested).
...
Packet receiving clean up.
2004-06-26 20:15:34 +00:00
Ondrej Filip
98ac61766d
A lot of changes:
...
- metric is 3 byte long now
- summary lsa originating
- more OSPF areas possible
- virtual links
- better E1/E2 routes handling
- some bug fixes..
I have to do:
- md5 auth (last mandatory item from rfc2328)
- !!!!DEBUG!!!!! (mainly virtual link system has probably a lot of bugs)
- 2328 appendig E
2004-06-25 16:39:53 +00:00
Ondrej Filip
1a61882d37
Better routing table calculation. We are ready to work with
...
multiple OSPF areas.
2004-06-11 09:36:50 +00:00
Ondrej Filip
7df86c25fc
Better checking of configuration.
2004-06-09 12:39:49 +00:00
Ondrej Filip
b8f17cf192
Small cleanup, indentation and preparation for multiple areas routing table calculation.
2004-06-06 16:00:09 +00:00
Ondrej Filip
d631698ec8
Indentation.
2004-06-06 14:27:11 +00:00
Ondrej Filip
2e10a170fe
Indentation.
2004-06-06 09:37:54 +00:00
Ondrej Filip
66261211a9
Struct area_net changed.
2004-06-06 09:13:37 +00:00
Ondrej Filip
b9ed99f738
Cleanup in iface.c
2004-06-06 08:55:33 +00:00
Ondrej Filip
c76ba51a5f
lsack.c cleaned. Better names for functions and
...
DIRECT acks can be sent in one packet now.
2004-06-04 16:30:04 +00:00
Ondrej Filip
39e517d47c
hello.c and hello.h cleaned up. No design changes.
2004-06-04 12:53:10 +00:00
Ondrej Filip
035f6acbfe
Patch from Andreas Steinmetz <ast@domdv.de>
2004-06-01 13:12:10 +00:00
Martin Mares
d83faf8dc4
static declarations don't belong to includes. (And most of them were
...
redundant anyway.)
2004-05-31 20:53:22 +00:00
Martin Mares
4ef3dccfa1
The OSPF authentication type was sent in host byte order instead of of
...
network byte order thus breaking interoperability with other routing
daemons on litte endian machines. The patch fixes this but note that
this breaks compatability with older bird installations using OSPF and
password authentication
(Andreas)
2004-05-31 18:13:14 +00:00
Ondrej Filip
c11007bc42
Endian-related bug fixes sent by Krzysztof Szuster <kszuster@polbox.com>
2003-08-26 10:41:02 +00:00
Ondrej Filip
c926eee724
Area networks added into configuration.
2001-08-12 00:04:42 +00:00
Ondrej Filip
78e2c6ccf1
I will not originate the same lsa before MINLSINTERVAL.
2001-08-11 14:01:54 +00:00
Ondrej Filip
b02e40111e
I allocate struct ifa before unlocking. So route exported to OSPF are correct.
...
I work also with interfaces that have some problems with socket opening.
I declare them as stub.
2000-09-04 19:42:17 +00:00
Ondrej Filip
fdb1998202
Serious bug in ext lsa origination found. Going for 1.0.4.
2000-09-03 22:18:40 +00:00
Ondrej Filip
e3bc10fdc4
Added stub interface. (Interface which is propagated to OSPF but
...
it does not sends nor listens packets.)
I added some new options, please look at it and look into doc if it's OK.
2000-09-02 08:54:40 +00:00
Ondrej Filip
a190e7200b
Added hellos on NBMA networks. (I don't violate RFC now.)
2000-09-02 00:03:36 +00:00
Ondrej Filip
423230f2f1
Ehm, my (B)DR election was based on router id, but RFC says ip!
2000-06-08 01:49:19 +00:00
Ondrej Filip
17e29574bc
Better algoritmus of LSA aging.
2000-06-07 23:48:33 +00:00
Ondrej Filip
b4af36e0d8
Removed some FIXMEs simply deleting them.
2000-06-07 21:50:16 +00:00
Ondrej Filip
7ab3ff6a28
Doc in neighbor.c and some tiny changes related to.
2000-06-07 21:46:22 +00:00
Ondrej Filip
cadbb827f9
A copyright change.
2000-06-07 21:12:00 +00:00
Ondrej Filip
3df89cefc1
#define SIZE_OF_IP_HEADER
2000-06-07 01:18:36 +00:00
Ondrej Filip
f14032efdd
First part of tracing.
2000-06-06 02:09:58 +00:00
Ondrej Filip
c1824c4d4c
Simple autentication added.
2000-06-06 01:23:03 +00:00
Ondrej Filip
f8f1e1f110
Interface locks added.
2000-06-06 00:46:00 +00:00
Ondrej Filip
e5b5d18c1c
NBMA networks should work now.
2000-06-05 23:44:26 +00:00
Ondrej Filip
3b580a23ad
Bugfix in NET LSA flushing.
...
Configuration now works! :-)
Better "show ospf"
Some minor bugfixes.
2000-06-05 20:57:53 +00:00
Ondrej Filip
273fd2c164
Many bugfixes (I don't remember all of them):
...
Added link ID calculation for external routes with same prefix but
different mask.
Bugfix in NET lsa origination.
Bugfix in NET hashing.
Bugfix in LSA installing.
2000-06-05 02:23:20 +00:00
Ondrej Filip
aaaff77605
More conf. items defined.
2000-06-03 09:50:31 +00:00
Ondrej Filip
89d6782dd1
interface {} added.
2000-06-03 01:29:00 +00:00
Ondrej Filip
b36a0a799c
area {} added to config.
2000-06-02 19:55:55 +00:00
Ondrej Filip
3fa5722def
First option into config added. :-)
2000-06-02 15:05:41 +00:00
Ondrej Filip
c4f0f01408
Added show ospf interface.
...
show ospf neighbors now knows "<interface>".
2000-06-01 17:52:21 +00:00
Ondrej Filip
4ab4e9778f
show ospf implemented.
2000-06-01 16:26:59 +00:00
Ondrej Filip
a783e259d8
Cisco-like "show ospf neighbors" implemented.
2000-06-01 15:53:06 +00:00
Ondrej Filip
d1660fd3f3
Sort cleanup in aging.
2000-05-31 14:21:56 +00:00
Ondrej Filip
70a383198a
LSArt origination and routing table calculation is now not doing so
...
often. Instead of calculation I just schedule it latter.
2000-05-31 14:06:33 +00:00
