Fixes cases where the same network or external route are propagated by
several OSPF routes and some other corner cases in next hop construction
and ECMP. Allows to specify whether external routes should be merged.
Thanks to Peter Christensen for the original patch.
I/O:
- BSD: specify src addr on IP sockets by IP_HDRINCL
- BSD: specify src addr on UDP sockets by IP_SENDSRCADDR
- Linux: specify src addr on IP/UDP sockets by IP_PKTINFO
- IPv6: specify src addr on IP/UDP sockets by IPV6_PKTINFO
- Alternative SKF_BIND flag for binding to IP address
- Allows IP/UDP sockets without tx_hook, on these
sockets a packet is discarded when TX queue is full
- Use consistently SOL_ for socket layer values.
OSPF:
- Packet src addr is always explicitly set
- Support for secondary addresses in BSD
- Dynamic RX/TX buffers
- Fixes some minor buffer overruns
- Interface option 'tx length'
- Names for vlink pseudoifaces (vlinkX)
- Vlinks use separate socket for TX
- Vlinks do not use fixed associated iface
- Fixes TTL for direct unicast packets
- Fixes DONTROUTE for OSPF sockets
- Use ifa->ifname instead of ifa->iface->name
Interfaces for OSPF and RIP could be configured to use (and request)
TTL 255 for traffic to direct neighbors.
Thanks to Simon Dickhoven for the original patch for RIPng.
Implements support for IPv6 traffic class, sets higher priority for OSPF
and RIP outgoing packets by default and allows to configure ToS/DS/TClass
IP header field and the local priority of outgoing packets.
BIRD used zero netmask in hello packets on all PtP links, not just on
unnumbered ones. This patch fixes it and adds option 'ptp netmask'
for overriding the default behavior.
Thanks to Alexander V. Chernikov for the original patch.
Configured NBMA neighbors in OSPFv3 should be link-local addresses, old
behavior was to silently ignore global ones. The patch allows BIRD to
accept global ones, but adds a warning and a documentation notice.
Thanks to Wilco Baan Hofman for the bugreport.
Now it shows a distance, option to change showing reachable/all network
nodes and better handling of AS-external LSAs in multiple areas. The
command 'show ospf topology' was changed to not show stubnets in both
OSPFv2 and OSPFv3 (previously it displayed stubnets in OSPFv2).
Allows to add more interface patterns to one common 'options'
section like:
interface "eth3", "eth4" { options common to eth3 and eth4 };
Also removes undocumented and unnecessary ability to specify
more interface patterns with different 'options' sections:
interface "eth3" { options ... }, "eth4" { options ... };
Cryptographic authentication in OSPF is defective by
design - there might be several packets independently
sent to the network (for example HELLO, LSUPD and LSACK)
where they might be reordered and that causes crypt.
sequence number error.
That can be workarounded by not incresing sequence number
too often. Now we update it only when last packet was sent
before at least one second. This can constitute a risk of
replay attacks, but RFC supposes something similar (like time
in seconds used as CSN).
values for MD5 password ID changed during reconfigure, Second
bug is that BIRD chooses password in first-fit manner, but RFC
says that it should use the one with the latest generate-from.
It also modifies the syntax for multiple passwords.
Now it is possible to just add more 'password' statements
to the interface section and it is not needed to use
'passwords' section. Old syntax can be used too.
