The resource dumping routines needed to be updated in v3 to use the new
API introduced in v2.
Conflicts:
filter/f-util.c
filter/filter.c
lib/birdlib.h
lib/event.c
lib/mempool.c
lib/resource.c
lib/resource.h
lib/slab.c
lib/timer.c
nest/config.Y
nest/iface.c
nest/iface.h
nest/locks.c
nest/neighbor.c
nest/proto.c
nest/route.h
nest/rt-attr.c
nest/rt-table.c
proto/bfd/bfd.c
proto/bmp/bmp.c
sysdep/unix/io.c
sysdep/unix/krt.c
sysdep/unix/main.c
sysdep/unix/unix.h
All the 'dump something' CLI commands now have a new mandatory
argument -- name of the file where to dump the data. This allows
for more flexible dumping even for production deployments where
the debug output is by default off.
Also the dump commands are now restricted (they weren't before)
to assure that only the appropriate users can run these time consuming
commands.
The restart timer was racy and didn't allow for immediate restarts
from limits. Now the protocols stores the last restart time and in case
of too frequent autorestarts caused by exceeded limits, the protocol
gets disabled with an error message.
Also now there is a configuration knob for this.
There were some nasty problems with deferred protocol state updates and
race conditions on BGP startup, shutdown, and also with referencing the
cached states.
Now it looks fixed.
To allow reading of protocol states from other protocols or completely
different routines, we have to export these states to data structures
not requiring to lock the protocol loops.
On one hand, this doesn't give the reader the actual state "right now",
on the other hand, getting that is impossible in a properly
multithreaded environment and you will always get the information with
some (little but noteworthy) delay.
This implementation handles only the basic state information of the
protocols, common for all the protocols. Adding protocol-specific state
information should be done by implementing the protocol hook init_state().
Channel information is stored but not announced, as we don't need the
announcements for now.
Channel is now just subscribing to yet another journal announcing
digested tries from the ROA table.
Creating tries in every channel on-the-fly was too slow to handle
and it ate obnoxious amounts of memory. Instead, the tries are
constructed directly in the table and the channels are notified
with the completed tries.
The delayed export-release mechanism is used to keep the tries allocated
until routes get reloaded.
Introducing a new omnipotent internal API to just pass route updates
from whatever point wherever we want.
From now on, all the exports should be processed by RT_WALK_EXPORTS
macro, and you can also issue a separate feed-only request to just get a
feed and finish.
The exporters can now also stop and the readers must expect that to
happen and recover. Main tables don't stop, though.
We have now better methods how to measure overall performance
and this obsolete protocol has basically rotten away. If anybody
needs its features, feel free to revive it in future.
Add a new protocol offering route aggregation.
User can specify list of route attributes in the configuration file and
run route aggregation on the export side of the pipe protocol. Routes are
sorted and for every group of equivalent routes new route is created and
exported to the routing table. It is also possible to specify filter
which will run for every route before aggregation.
Furthermore, it will be possible to set attributes of new routes
according to attributes of the aggregated routes.
This is a work in progress.
Original work by Igor Putovny, subsequent cleanups and finalization by
Maria Matejka.
This is a split-commit of the neighboring aggregator branch
with a bit improved lvalue handling, to have easier merge into v3.
Some [redacted] (yes, myself) had a really bad idea
to rename nest/route.h to nest/rt.h while refactoring
some data structures out of it.
This led to unnecessarily complex problems with
merging updates from v2. Reverting this change
to make my life a bit easier.
At least it needed only one find-sed command:
find -name '*.[chlY]' -type f -exec sed -i 's#nest/rt.h#nest/route.h#' '{}' +
There are now 3 different pools with specific lifetime. All of these are
available since protocol start, anyway they get freed in different
moments.
First, pool_up gets freed immediately after announcing PS_STOP, to e.g.
stop all timers and events regularly updating the routing table when the
imports are already flushing.
Then, pool_inloop gets freed just before the protocol loop is finally
stopped, after all channels, imports and exports and other hooks are
cleaned up.
And finally, the pool itself is freed the last. Unless you explicitly
need the early free, use this pool.
Old configs do not define MPLS domains and may use a static protocol
to define static MPLS routes.
When MPLS channel is the only channel of static protocol, handle it
as a main channel. Also, define implicit MPLS domain if needed and
none is defined.
The L3VPN protocol implements RFC 4364 BGP/MPLS VPNs using MPLS backbone.
It works similarly to pipe. It connects IP table (one per VRF) with (global)
VPN table. Routes passed from VPN table to IP table are stripped of RD and
filtered by import targets, routes passed in the other direction are extended
with RD, MPLS labels and export targets in extended communities. A separate
MPLS channel is used to announce MPLS routes for the labels.
The MPLS subsystem manages MPLS labels and handles their allocation to
MPLS-aware routing protocols. These labels are then attached to IP or VPN
routes representing label switched paths -- LSPs.
There was already a preliminary MPLS support consisting of MPLS label
net_addr, MPLS routing tables with static MPLS routes, remote labels in
next hops, and kernel protocol support.
This patch adds the MPLS domain as a basic structure representing local
label space with dynamic label allocator and configurable label ranges.
To represent LSPs, allocated local labels can be attached as route
attributes to IP or VPN routes with local labels as attributes.
There are several steps for handling LSP routes in routing protocols --
deciding to which forwarding equivalence class (FEC) the LSP route
belongs, allocating labels for new FECs, announcing MPLS routes for new
FECs, attaching labels to LSP routes. The FEC map structure implements
basic code for managing FECs in routing protocols, therefore existing
protocols can be made MPLS-aware by adding FEC map and delegating
most work related to local label management to it.
If the protocol supports route refresh on export, we keep the stop-start
method of route refeed. This applies for BGP with ERR or with export
table on, for OSPF, Babel, RIP or Pipe.
For BGP without ERR or for future selective ROA reloads, we're adding an
auxiliary export request, doing the refeed while the main export request
is running, somehow resembling the original method of BIRD 2 refeed.
There is also a refeed request queue to keep track of different refeed
requests.
Add a new protocol offering route aggregation.
User can specify list of route attributes in the configuration file and
run route aggregation on the export side of the pipe protocol. Routes are
sorted and for every group of equivalent routes new route is created and
exported to the routing table. It is also possible to specify filter
which will run for every route before aggregation.
Furthermore, it will be possible to set attributes of new routes
according to attributes of the aggregated routes.
This is a work in progress.
Original work by Igor Putovny, subsequent cleanups and finalization by
Maria Matejka.
For now, there are 4 phases: Necessary (device), Connector (kernel, pipe), Generator (static, rpki) and Regular.
Started and reconfigured are from Necessary to Regular, shutdown backwards.
This way, kernel can flush routes before actually being shutdown.
Now we use rt_notify() and channels for both feed and notifications,
in both import tables (pre-policy) and regular tables (post-policy).
Remove direct walk in bmp_route_monitor_snapshot().
- Manage BMP state through bmp_peer, bmp_stream, bmp_table structures
- Use channels and rt_notify() hook for route announcements
- Add support for post-policy monitoring
- Send End-of-RIB even when there is no routes
- Remove rte_update_in_notify() hook from import tables
- Update import tables to support channels
- Add bmp_hack (no feed / no flush) flag to channels
Memory allocation is a fragile part of BIRD and we need checking that
everybody is using the resource pools in an appropriate way. To assure
this, all the resource pools are associated with locking domains and
every resource manipulation is thoroughly checked whether the
appropriate locking domain is locked.
With transitive resource manipulation like resource dumping or mass free
operations, domains are locked and unlocked on the go, thus we require
pool domains to have higher order than their parent to allow for this
transitive operations.
Adding pool locking revealed some cases of insecure memory manipulation
and this commit fixes that as well.
