Conf: debug tables

For now just a dummy config but it is needed for forward
compatibility with v3.

conf/conf.h

@@ -35,6 +35,7 @@ struct config {
   u32 proto_default_debug;		/* Default protocol debug mask */
   u32 proto_default_mrtdump;		/* Default protocol mrtdump mask */
   u32 channel_default_debug;		/* Default channel debug mask */
+  u32 table_default_debug;		/* Default table debug mask */
   struct timeformat tf_route;		/* Time format for 'show route' */
   struct timeformat tf_proto;		/* Time format for 'show protocol' */
   struct timeformat tf_log;		/* Time format for the logfile */

doc/bird.sgml

@@ -505,6 +505,11 @@ include "tablename.conf";;
 	See <ref id="channel-debug" name="debug"> in the channel section.
 	Default: off.
 
+	<tag><label id="opt-debug-tables">debug tables all|off|{ states|routes|filters|events [, <m/.../] }</tag>
+	Set global defaults of table debugging options.
+	See <ref id="table-debug" name="debug"> in the table section.
+	Default: off.
+
 	<tag><label id="opt-debug-commands">debug commands <m/number/</tag>
 	Control logging of client connections (0 for no logging, 1 for logging
 	of connects and disconnects, 2 and higher for logging of all client
@@ -640,6 +645,12 @@ that implicit tables (<cf/master4/ and <cf/master6/) can be redefined in order
 to set options.
 
 <descrip>
+	<tag><label id="table-debug">debug all|off|{ states|routes|filters [, <m/.../] }</tag>
+	Set table debugging options. Like in <ref id="proto-debug"
+	name="protocol debugging">, tables are capable of writing trace
+	messages about its work to the log (with category <cf/trace/).
+	For now, this does nothing, but in version 3, it is used. Default: off.
+
 	<tag><label id="rtable-sorted">sorted <m/switch/</tag>
 	Usually, a routing table just chooses the selected (best) route from a
 	list of routes for each network, while keeping remaining routes unsorted.

nest/config.Y

@@ -114,7 +114,7 @@ proto_postconfig(void)
 CF_DECLS
 
 CF_KEYWORDS(ROUTER, ID, HOSTNAME, PROTOCOL, TEMPLATE, PREFERENCE, DISABLED, DEBUG, ALL, OFF, DIRECT)
-CF_KEYWORDS(INTERFACE, IMPORT, EXPORT, FILTER, NONE, VRF, DEFAULT, TABLE, STATES, ROUTES, FILTERS)
+CF_KEYWORDS(INTERFACE, IMPORT, EXPORT, FILTER, NONE, VRF, DEFAULT, TABLE, TABLES, STATES, ROUTES, FILTERS)
 CF_KEYWORDS(IPV4, IPV6, VPN4, VPN6, ROA4, ROA6, FLOW4, FLOW6, SADR, MPLS)
 CF_KEYWORDS(RECEIVE, LIMIT, ACTION, WARN, BLOCK, RESTART, DISABLE, KEEP, FILTERED, RPKI)
 CF_KEYWORDS(PASSWORD, KEY, FROM, PASSIVE, TO, ID, EVENTS, PACKETS, PROTOCOLS, CHANNELS, INTERFACES)
@@ -230,6 +230,7 @@ table_sorted:
 
 table_opt:
    SORTED bool { this_table->sorted = $2; }
+ | DEBUG debug_mask { this_table->debug = $2; }
  | TRIE bool {
      if (!net_val_match(this_table->addr_type, NB_IP | NB_VPN | NB_ROA | NB_IP6_SADR))
        cf_error("Trie option not supported for %s table", net_label[this_table->addr_type]);
@@ -380,6 +381,7 @@ conf: debug_default ;
 debug_default:
    DEBUG PROTOCOLS debug_mask { new_config->proto_default_debug = $3; }
  | DEBUG CHANNELS debug_mask { new_config->channel_default_debug = $3; }
+ | DEBUG TABLES debug_mask { new_config->table_default_debug = $3; }
  | DEBUG COMMANDS expr { new_config->cli_debug = $3; }
  ;
 

nest/route.h

@@ -150,6 +150,7 @@ struct rtable_config {
   uint addr_type;			/* Type of address data stored in table (NET_*) */
   uint gc_threshold;			/* Maximum number of operations before GC is run */
   uint gc_period;			/* Approximate time between two consecutive GC runs */
+  u32 debug;				/* Debugging flags (D_*) */
   byte sorted;				/* Routes of network are sorted according to rte_better() */
   byte internal;			/* Internal table of a protocol */
   byte trie_used;			/* Rtable has attached trie */
@@ -166,6 +167,7 @@ typedef struct rtable {
   char *name;				/* Name of this table */
   list channels;			/* List of attached channels (struct channel) */
   uint addr_type;			/* Type of address data stored in table (NET_*) */
+  u32 debug;				/* Debugging flags (D_*) */
   int pipe_busy;			/* Pipe loop detection */
   int use_count;			/* Number of protocols using this table */
   u32 rt_count;				/* Number of routes in the table */

nest/rt-table.c

@@ -2040,6 +2040,7 @@ rt_setup(pool *pp, struct rtable_config *cf)
   t->name = cf->name;
   t->config = cf;
   t->addr_type = cf->addr_type;
+  t->debug = cf->debug;
 
   fib_init(&t->fib, p, t->addr_type, sizeof(net), OFFSETOF(net, n), 0, NULL);
 
@@ -2752,6 +2753,7 @@ rt_new_table(struct symbol *s, uint addr_type)
   c->gc_period = (uint) -1;	/* set in rt_postconfig() */
   c->min_settle_time = 1 S;
   c->max_settle_time = 20 S;
+  c->debug = new_config->table_default_debug;
 
   add_tail(&new_config->tables, &c->n);
 
@@ -2809,6 +2811,7 @@ rt_reconfigure(rtable *tab, struct rtable_config *new, struct rtable_config *old
   new->table = tab;
   tab->name = new->name;
   tab->config = new;
+  tab->debug = new->debug;
 
   return 1;
 }