mirrors/bird
mirrors/bird
0
0
Fork 0
mirror of https://gitlab.nic.cz/labs/bird.git synced 2024-12-22 01:31:55 +00:00
Code Releases Activity

Merge commit '39e75b87' into thread-merge-2.16

Browse Source
This commit is contained in:
Maria Matejka 2024-11-28 12:43:43 +01:00
commit 52a11170fe
3 changed files with 37 additions and 29 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

43
doc/bird.sgml
View File

@ -1702,7 +1702,7 @@ in the foot).
Route Distinguisher (<rfc id="4364">). They support the same special
operators as IP prefixes, and also <cf/.rd/ which extracts the Route
Distinguisher. Their literals are written
as <cf><m/vpnrd/ <m/ipprefix/</cf>
as <cf><m/rd/ <m/ipprefix/</cf>
<cf/NET_ROA4/ and <cf/NET_ROA6/ prefixes hold an IP prefix range
together with an ASN. They support the same special operators as IP
@ -1717,9 +1717,9 @@ in the foot).
<cf/NET_MPLS/ holds a single MPLS label and its handling is currently
not implemented.
<tag><label id="type-vpnrd">vpnrd</tag>
<tag><label id="type-rd"><label id="type-vpnrd">rd</tag>
This is a route distinguisher according to <rfc id="4364">. There are
three kinds of RD's: <cf><m/asn/:<m/32bit int/</cf>, <cf><m/asn4/:<m/16bit int/</cf>
three kinds of RDs: <cf><m/asn/:<m/32bit int/</cf>, <cf><m/asn4/:<m/16bit int/</cf>
and <cf><m/IPv4 address/:<m/32bit int/</cf>
<tag><label id="type-ec">ec</tag>
@ -1746,9 +1746,9 @@ in the foot).
to extract corresponding components of LCs:
<cf>(<m/asn/, <m/data1/, <m/data2/)</cf>.
<tag><label id="type-set">int|pair|quad|ip|prefix|ec|lc|enum set</tag>
Filters recognize four types of sets. Sets are similar to strings: you
can pass them around but you can't modify them. Literals of type <cf>int
<tag><label id="type-set">int|pair|quad|ip|prefix|ec|lc|rd|enum set</tag>
Filters recognize several types of sets. Sets are similar to strings: you
can pass them around but you cannot modify them. Literals of type <cf>int
set</cf> look like <cf> [ 1, 2, 5..7 ]</cf>. As you can see, both simple
values and ranges are permitted in sets.
@ -1771,9 +1771,11 @@ in the foot).
is valid, while <cf/(10, *, 20..30)/ or <cf/(10, 20..30, 40)/ is not
valid.
You can also use expressions for int, pair, EC and LC set values.
However, it must be possible to evaluate these expressions before daemon
boots. So you can use only constants inside them. E.g.
You can also use named constants or compound expressions for non-prefix
set values. However, it must be possible to evaluate these expressions
before daemon boots. So you can use only constants inside them. Also,
in case of compound expressions, they require parentheses around them.
E.g.
<code>
define one=1;
@ -1782,7 +1784,7 @@ in the foot).
pair set ps;
ec set es;
odds = [ one, 2+1, 6-one, 2*2*2-1, 9, 11 ];
odds = [ one, (2+1), (6-one), (2*2*2-1), 9, 11 ];
ps = [ (1,one+one), (3,4)..(4,8), (5,*), (6,3..6), (7..9,*) ];
es = [ (rt, myas, 3*10), (rt, myas+one, 0..16*16*16-1), (ro, myas+2, *) ];
</code>
@ -1995,13 +1997,16 @@ may be an existing one (when just name is used) or a locally defined (when type
and name is used). In both cases, it must have the same type as elements.
<p>The <cf>case</cf> is similar to case from Pascal. Syntax is <cf>case
<m/expr/ { else: | <m/num_or_prefix [ .. num_or_prefix]/: <m/statement/ ; [
... ] }</cf>. The expression after <cf>case</cf> can be of any type which can be
on the left side of the &tilde; operator and anything that could be a member of
a set is allowed before <cf/:/. Multiple commands must be grouped by <cf/{}/.
If <cf><m/expr/</cf> matches one of the <cf/:/ clauses, statements
between it and next <cf/:/ statement are executed. If <cf><m/expr/</cf> matches
neither of the <cf/:/ clauses, the statements after <cf/else:/ are executed.
<m/expr/ { else: | <m/set_body_expr/ /: <m/statement/ ; [... ] }</cf>.
The expression after <cf>case</cf> can be of any type that could be a member of
a set, while the <m/set_body_expr/ before <cf/:/ can be anything (constants,
intervals, expressions) that could be a part of a set literal. One exception is
prefix type, which can be used in sets bud not in <cf/case/ structure. Multiple
commands must be grouped by <cf/{}/. If <cf><m/expr/</cf> matches one
of the <cf/:/ clauses, the statement or block after it is
executed. If <cf><m/expr/</cf> matches neither of the <cf/:/ clauses, the
statement or block after <cf/else:/ is executed.
<p>Here is example that uses <cf/if/ and <cf/case/ structures:
@ -4120,11 +4125,11 @@ could have up to 5 channels: <cf/ipv4/, <cf/ipv6/, <cf/vpn4/, <cf/vpn6/, and
<cf/mpls/.
<p><descrip>
<tag><label id="l3vpn-route-distinguisher">route distinguisher <m/vpnrd/</tag>
<tag><label id="l3vpn-route-distinguisher">route distinguisher <m/rd/</tag>
The route distinguisher that is attached to routes in the export
direction. Mandatory.
<tag><label id="l3vpn-rd">rd <m/vpnrd/</tag>
<tag><label id="l3vpn-rd">rd <m/rd/</tag>
A shorthand for the option <cf/route distinguisher/.
<tag><label id="l3vpn-import-target">import target <m/ec/|<m/ec-set/</tag>

21
filter/config.Y
View File

@ -393,7 +393,7 @@ CF_KEYWORDS(FUNCTION, PRINT, PRINTN, UNSET, RETURN,
%type <i32> cnum
%type <e> pair_item ec_item lc_item set_item switch_item ec_items set_items switch_items switch_body
%type <trie> fprefix_set
%type <v> set_atom switch_atom fipa
%type <v> set_atom0 set_atom switch_atom fipa
%type <px> fprefix
%type <t> get_cf_position
%type <s> for_var
@ -666,27 +666,30 @@ fipa:
* as a function call in switch case cmds.
*/
set_atom:
set_atom0:
NUM { $$.type = T_INT; $$.val.i = $1; }
| fipa { $$ = $1; }
| VPN_RD { $$.type = T_RD; $$.val.ec = $1; }
| ENUM { $$.type = pair_a($1); $$.val.i = pair_b($1); }
| '(' term ')' {
$$ = cf_eval_tmp($2, T_VOID);
if (!f_valid_set_type($$.type)) cf_error("Set-incompatible type");
if (!f_valid_set_type($$.type))
cf_error("Set-incompatible type (%s)", f_type_name($$.type));
}
;
set_atom:
set_atom0
| CF_SYM_KNOWN {
cf_assert_symbol($1, SYM_CONSTANT);
if (!f_valid_set_type(SYM_TYPE($1))) cf_error("%s: set-incompatible type", $1->name);
if (!f_valid_set_type(SYM_TYPE($1)))
cf_error("%s: Set-incompatible type (%s)", $1->name, f_type_name(SYM_TYPE($1)));
$$ = *$1->val;
}
;
switch_atom:
NUM { $$.type = T_INT; $$.val.i = $1; }
| '(' term ')' { $$ = cf_eval_tmp($2, T_INT); }
| fipa { $$ = $1; }
| ENUM { $$.type = pair_a($1); $$.val.i = pair_b($1); }
set_atom0
;
cnum:
@ -779,7 +782,7 @@ fprefix_set:
;
switch_body: /* EMPTY */ { $$ = NULL; }
| switch_body switch_items ':' cmd {
| switch_body switch_items ':' cmd {
/* Fill data fields */
struct f_tree *t;
for (t = $2; t; t = t->left)

2
filter/test.conf
View File

@ -252,7 +252,7 @@ function t_int()
}
case four {
4: bt_assert(true);
(2+2): bt_assert(true);
else: bt_assert(false);
}