OSPF instance id option and documentation update.

doc/bird.sgml

@@ -2288,6 +2288,7 @@ networks.
 <code>
 protocol ospf &lt;name&gt; {
 	rfc1583compat &lt;switch&gt;;
+	instance id &lt;num&gt;;
 	stub router &lt;switch&gt;;
 	tick &lt;num&gt;;
 	ecmp &lt;switch&gt; [limit &lt;num&gt;];
@@ -2375,14 +2376,24 @@ protocol ospf &lt;name&gt; {
 	RFC 1583 <htmlurl url="ftp://ftp.rfc-editor.org/in-notes/rfc1583.txt">.
 	Default	value is no.
 
+	<tag>instance id <m/num/</tag>
+	When multiple OSPF protocol instances are active on the same links, they
+	should use different instance IDs to distinguish their packets. Although
+	it could be done on per-interface basis, it is often preferred to set
+	one instance ID to whole OSPF domain/topology (e.g., when multiple
+	instances are used to represent separate logical topologies on the same
+	physical network). This option specifies the default instance ID for all
+	interfaces of the OSPF instance. Note that this option, if used, must
+	precede interface definitions. Default value is 0.
+
 	<tag>stub router <M>switch</M></tag>
 	This option configures the router to be a stub router, i.e., a router
 	that participates in the OSPF topology but does not allow transit
 	traffic. In OSPFv2, this is implemented by advertising maximum metric
-	for outgoing links, as suggested by
+	for outgoing links. In OSPFv3, the stub router behavior is announced by
-	RFC 3137 <htmlurl url="ftp://ftp.rfc-editor.org/in-notes/rfc3137.txt">.
+	clearing the R-bit in the router LSA. See RFC 6987
-	In OSPFv3, the stub router behavior is announced by clearing the R-bit
+	<htmlurl url="ftp://ftp.rfc-editor.org/in-notes/rfc6987.txt"> for
-	in the router LSA. Default value is no.
+	details. Default value is no.
 
 	<tag>tick <M>num</M></tag>
 	The routing table calculation and clean-up of areas' databases is not
@@ -2484,22 +2495,26 @@ protocol ospf &lt;name&gt; {
 	prefix. When option <cf/summary/ is used, also default stub networks
 	that are subnetworks of given stub network are suppressed. This might be
 	used, for example, to aggregate generated stub networks.
-	 
+
 	<tag>interface <M>pattern</M> [instance <m/num/]</tag>
 	Defines that the specified interfaces belong to the area being defined.
 	See <ref id="dsc-iface" name="interface"> common option for detailed
 	description. In OSPFv2, extended interface clauses are used, because
-	OSPFv2 handles each network prefix as a separate virtual interface. In
+	each network prefix is handled as a separate virtual interface.
-	OSPFv3, you can specify instance ID for that interface description, so
+
-	it is possible to have several instances of that interface with
+	You can specify alternative instance ID for the interface definition,
-	different options or even in different areas.
+	therefore it is possible to have several instances of that interface
+	with different options or even in different areas. For OSPFv2,
+	instance ID support is an extension (RFC 6549
+	<htmlurl url="ftp://ftp.rfc-editor.org/in-notes/rfc6549.txt">) and is
+	supposed to be set per-protocol. For OSPFv3, it is an integral feature.
 
 	<tag>virtual link <M>id</M> [instance <m/num/]</tag>
 	Virtual link to router with the router id. Virtual link acts as a
 	point-to-point interface belonging to backbone. The actual area is used
-	as transport area. This item cannot be in the backbone. In OSPFv3, you
+	as a transport area. This item cannot be in the backbone. Like with
-	could also use several virtual links to one destination with different
+	<cf/interface/ option, you could also use several virtual links to one
-	instance IDs.
+	destination with different instance IDs.
 
 	<tag>cost <M>num</M></tag>
 	Specifies output cost (metric) of an interface. Default value is 10.
@@ -2530,8 +2545,8 @@ protocol ospf &lt;name&gt; {
 
 	<tag>wait <M>num</M></tag>
 	After start, router waits for the specified number of seconds between
-	starting election and building adjacency. Default value is 40.
+	starting election and building adjacency. Default value is 4*<m/hello/.
-	 
+
 	<tag>dead count <M>num</M></tag>
 	When the router does not receive any messages from a neighbor in
 	<m/dead count/*<m/hello/ seconds, it will consider the neighbor down.

proto/ospf/config.Y

@@ -19,7 +19,7 @@ static struct ospf_area_config *this_area;
 static struct nbma_node *this_nbma;
 static list *this_nets;
 static struct area_net_config *this_pref;
-static struct ospf_stubnet_config *this_stubnet; 
+static struct ospf_stubnet_config *this_stubnet;
 
 static inline int ospf_cfg_is_v2(void) { return OSPF_CFG->ospf2; }
 static inline int ospf_cfg_is_v3(void) { return ! OSPF_CFG->ospf2; }
@@ -32,6 +32,9 @@ ospf_iface_finish(void)
   if (ip->deadint == 0)
     ip->deadint = ip->deadc * ip->helloint;
 
+  if (ip->waitint == 0)
+    ip->waitint = ip->deadc * ip->helloint;
+
   ip->passwords = get_passwords();
 
   if ((ip->autype == OSPF_AUTH_CRYPT) && (ip->helloint < 5))
@@ -159,6 +162,7 @@ ospf_proto_item:
  | ECMP bool LIMIT expr { OSPF_CFG->ecmp = $2 ? $4 : 0; if ($4 < 0) cf_error("ECMP limit cannot be negative"); }
  | MERGE EXTERNAL bool { OSPF_CFG->merge_external = $3; }
  | TICK expr { OSPF_CFG->tick = $2; if($2<=0) cf_error("Tick must be greater than zero"); }
+ | INSTANCE ID expr { OSPF_CFG->instance_id = $3; if (($3<0) || ($3>255)) cf_error("Instance ID must be in range 0-255"); }
  | ospf_area
  ;
 
@@ -213,7 +217,7 @@ ospf_stubnet_start:
      add_tail(&this_area->stubnet_list, NODE this_stubnet);
      this_stubnet->px = $1;
      this_stubnet->cost = COST_D;
-   } 
+   }
  ;
 
 ospf_stubnet_opts:
@@ -239,9 +243,9 @@ ospf_vlink_opts:
 
 ospf_vlink_item:
  | HELLO expr { OSPF_PATT->helloint = $2 ; if (($2<=0) || ($2>65535)) cf_error("Hello interval must be in range 1-65535"); }
- | RETRANSMIT expr { OSPF_PATT->rxmtint = $2 ; if ($2<=0) cf_error("Retransmit int must be greater than zero"); }
+ | RETRANSMIT expr { OSPF_PATT->rxmtint = $2 ; if ($2<=1) cf_error("Retransmit int must be greater than one"); }
  | TRANSMIT DELAY expr { OSPF_PATT->inftransdelay = $3 ; if (($3<=0) || ($3>65535)) cf_error("Transmit delay must be in range 1-65535"); }
- | WAIT expr { OSPF_PATT->waitint = $2 ; }
+ | WAIT expr { OSPF_PATT->waitint = $2 ; if ($2<=1) cf_error("Wait interval must be greater than one"); }
  | DEAD expr { OSPF_PATT->deadint = $2 ; if ($2<=1) cf_error("Dead interval must be greater than one"); }
  | DEAD COUNT expr { OSPF_PATT->deadc = $3 ; if ($3<=1) cf_error("Dead count must be greater than one"); }
  | AUTHENTICATION NONE { OSPF_PATT->autype = OSPF_AUTH_NONE;  }
@@ -261,12 +265,10 @@ ospf_vlink_start: VIRTUAL LINK idval
   OSPF_PATT->helloint = HELLOINT_D;
   OSPF_PATT->rxmtint = RXMTINT_D;
   OSPF_PATT->inftransdelay = INFTRANSDELAY_D;
-  OSPF_PATT->waitint = WAIT_DMH*HELLOINT_D;
   OSPF_PATT->deadc = DEADC_D;
-  OSPF_PATT->deadint = 0;
   OSPF_PATT->type = OSPF_IT_VLINK;
+  OSPF_PATT->instance_id = OSPF_CFG->instance_id;
   init_list(&OSPF_PATT->nbma_list);
-  OSPF_PATT->autype = OSPF_AUTH_NONE;
   reset_passwords();
  }
 ;
@@ -275,8 +277,8 @@ ospf_iface_item:
    COST expr { OSPF_PATT->cost = $2 ; if (($2<=0) || ($2>65535)) cf_error("Cost must be in range 1-65535"); }
  | HELLO expr { OSPF_PATT->helloint = $2 ; if (($2<=0) || ($2>65535)) cf_error("Hello interval must be in range 1-65535"); }
  | POLL expr { OSPF_PATT->pollint = $2 ; if ($2<=0) cf_error("Poll int must be greater than zero"); }
- | RETRANSMIT expr { OSPF_PATT->rxmtint = $2 ; if ($2<=0) cf_error("Retransmit int must be greater than zero"); }
+ | RETRANSMIT expr { OSPF_PATT->rxmtint = $2 ; if ($2<=1) cf_error("Retransmit int must be greater than one"); }
- | WAIT expr { OSPF_PATT->waitint = $2 ; }
+ | WAIT expr { OSPF_PATT->waitint = $2 ; if ($2<=1) cf_error("Wait interval must be greater than one"); }
  | DEAD expr { OSPF_PATT->deadint = $2 ; if ($2<=1) cf_error("Dead interval must be greater than one"); }
  | DEAD COUNT expr { OSPF_PATT->deadc = $3 ; if ($3<=1) cf_error("Dead count must be greater than one"); }
  | TYPE BROADCAST { OSPF_PATT->type = OSPF_IT_BCAST ; }
@@ -300,8 +302,8 @@ ospf_iface_item:
  | AUTHENTICATION NONE { OSPF_PATT->autype = OSPF_AUTH_NONE; }
  | AUTHENTICATION SIMPLE { OSPF_PATT->autype = OSPF_AUTH_SIMPLE; ospf_check_auth(); }
  | AUTHENTICATION CRYPTOGRAPHIC { OSPF_PATT->autype = OSPF_AUTH_CRYPT; ospf_check_auth(); }
- | RX BUFFER NORMAL { OSPF_PATT->rx_buffer = 0; } 
+ | RX BUFFER NORMAL { OSPF_PATT->rx_buffer = 0; }
- | RX BUFFER LARGE { OSPF_PATT->rx_buffer = OSPF_MAX_PKT_SIZE; } 
+ | RX BUFFER LARGE { OSPF_PATT->rx_buffer = OSPF_MAX_PKT_SIZE; }
  | RX BUFFER expr { OSPF_PATT->rx_buffer = $3; if (($3 < OSPF_MIN_PKT_SIZE) || ($3 > OSPF_MAX_PKT_SIZE)) cf_error("Buffer size must be in range 256-65535"); }
  | TX tos { OSPF_PATT->tx_tos = $2; }
  | TX PRIORITY expr { OSPF_PATT->tx_priority = $3; }
@@ -344,7 +346,7 @@ nbma_eligible:
  /* empty */ { $$ = 0; }
  | ELIGIBLE { $$ = 1; }
  ;
- 
+
 nbma_item: ipa nbma_eligible ';'
  {
    this_nbma = cfg_allocz(sizeof(struct nbma_node));
@@ -353,7 +355,7 @@ nbma_item: ipa nbma_eligible ';'
    this_nbma->eligible=$2;
  }
 ;
- 
+
 ospf_iface_start:
  {
   this_ipatt = cfg_allocz(sizeof(struct ospf_iface_patt));
@@ -365,12 +367,10 @@ ospf_iface_start:
   OSPF_PATT->rxmtint = RXMTINT_D;
   OSPF_PATT->inftransdelay = INFTRANSDELAY_D;
   OSPF_PATT->priority = PRIORITY_D;
-  OSPF_PATT->waitint = WAIT_DMH*HELLOINT_D;
   OSPF_PATT->deadc = DEADC_D;
-  OSPF_PATT->deadint = 0;
   OSPF_PATT->type = OSPF_IT_UNDEF;
+  OSPF_PATT->instance_id = OSPF_CFG->instance_id;
   init_list(&OSPF_PATT->nbma_list);
-  OSPF_PATT->autype = OSPF_AUTH_NONE;
   OSPF_PATT->ptp_netmask = 2; /* not specified */
   OSPF_PATT->tx_tos = IP_PREC_INTERNET_CONTROL;
   OSPF_PATT->tx_priority = sk_priority_control;
@@ -380,12 +380,12 @@ ospf_iface_start:
 
 ospf_instance_id:
    /* empty */
- | INSTANCE expr { OSPF_PATT->instance_id = $2; }
+ | INSTANCE expr { OSPF_PATT->instance_id = $2; if (($2<0) || ($2>255)) cf_error("Instance ID must be in range 0-255"); }
  ;
 
 ospf_iface_patt_list:
    iface_patt_list { if (ospf_cfg_is_v3()) iface_patt_check(); } ospf_instance_id
- ; 
+ ;
 
 ospf_iface_opts:
    /* empty */

proto/ospf/ospf.c

@@ -87,6 +87,13 @@
  * we have recalculated and also those we have deleted to the core's routing
  * table and the core will take care of the rest. This simplifies the process
  * and conserves memory.
+ *
+ * Supported standards:
+ * - RFC 2328 - main OSPFv2 standard
+ * - RFC 5340 - main OSPFv3 standard
+ * - RFC 3101 - OSPFv2 NSSA areas
+ * - RFC 6549 - OSPFv2 multi-instance extensions
+ * - RFC 6987 - OSPF stub router advertisement
  */
 
 #include <stdlib.h>

proto/ospf/ospf.h

@@ -103,12 +103,13 @@ struct ospf_config
 {
   struct proto_config c;
   uint tick;
-  byte ospf2;
+  u8 ospf2;
-  byte rfc1583;
+  u8 rfc1583;
-  byte stub_router;
+  u8 stub_router;
-  byte merge_external;
+  u8 merge_external;
-  byte abr;
+  u8 instance_id;
-  byte asbr;
+  u8 abr;
+  u8 asbr;
   int ecmp;
   list area_list;		/* list of area configs (struct ospf_area_config) */
   list vlink_list;		/* list of configured vlinks (struct ospf_iface_patt) */