mirrors/bird
mirrors/bird
0
0
Fork 0
mirror of https://gitlab.nic.cz/labs/bird.git synced 2024-12-22 09:41:54 +00:00
Code Releases Activity

Merged mj's changes, up-to "import filter".

Browse Source
This commit is contained in:
Pavel Machek 2000-06-06 11:53:22 +00:00
parent 41ad16e2d5
commit 02357f960e
1 changed files with 81 additions and 83 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

162
doc/bird.sgml
View File

@ -3,6 +3,10 @@
<!--
BIRD documentation
This documentation can have 4 forms: sgml (this is master copy), html,
ASCII text and dvi/postscript (generated from sgml using
sgmltools). You should always edit master copy.
This is slightly modified linuxdoc dtd. Anything in <descrip> tags is considered definition of
configuration primitives, <cf> is fragment of configuration within normal text, <m> is
"meta" information within fragment of configuration - something in config which is not keyword.
@ -46,22 +50,20 @@ for `BIRD Internet Routing Daemon', you remember, don't you? :-)
which works as a dynamic router in an Internet type network (that is, in a network running either
the IPv4 or the IPv6 protocol). Routers are devices which forward packets between interconnected
networks in order to allow hosts not connected directly to the same local area network to
communicate with each other. They also communicate with other routers in the Internet to discover
communicate with each other. They also communicate with the other routers in the Internet to discover
the topology of the network which allows them to find optimal (in terms of some metric) rules for
forwarding of packets (which will be called routes in the rest of this document) and to adapt to the
forwarding of packets (which will be called routes in the rest of this document) and to adapt themselves to the
changing conditions such as outages of network links, building of new connections and so on. Most of
these routers are costly dedicated devices running obscure firmware which is hard to configure and
not open to any changes (but these costly dedicated beasts are needed
for routing on many fast interfaces -- a PC class machine can not keep up with more than 4
100Mbps cards). Fortunately, most operating systems of the UNIX family allow an ordinary
not open to any changes (on the other hand, their special hardware design allows them to keep up with lots of high-speed network interfaces, better than general-purpose computer does). Fortunately, most operating systems of the UNIX family allow an ordinary
computer to act as a router and forward packets belonging to the other hosts, but only according to
a statically configured table.
<p>A <em/Routing Daemon/ is in UNIX terminology a non-interactive program running on
background which does the dynamic part of Internet routing, that is it communicates
with the other routers, calculates routing tables and sends them to the OS kernel
which does the actual packet forwarding. There are other such routing daemons: routed (rip only), GateD <HTMLURL URL="http://www.gated.org/">
(non free) and Zebra <HTMLURL URL="http://www.zebra.org">, but their capabilities are limited and
which does the actual packet forwarding. There already exist other such routing daemons: routed (rip only), GateD<HTMLURL URL="http://www.gated.org/">
(non free), Zebra<HTMLURL URL="http://www.zebra.org"> and mrtd<HTMLURL URL="FIXME">, but their capabilities are limited and
they are relatively hard to configure and maintain.
<p>BIRD is an Internet Routing Daemon designed to avoid all of these shortcomings,
@ -75,15 +77,15 @@ protocols to be incorporated easily. Among other features, BIRD supports:
<item>the Border Gateway Protocol (BGPv4)
<item>the Routing Interchange Protocol (RIPv2)
<item>the Open Shortest Path First protocol (OSPFv2)
<item>a virtual protocol for exchange of routes between internal routing tables
<item>a virtual protocol for exchange of routes between different routing tables on a single host
<item>a command-line interface allowing on-line control and inspection
of status of the daemon
<item>soft reconfiguration (no need to use complex online commands
to change the configuration, just edit the configuration file
and notify BIRD to re-read it and it will smoothly switch
and notify BIRD to re-read it and it will smoothly switch itself
to the new configuration, not disturbing routing protocols
unless they are affected by the configuration changes)
<item>powerful language for route filtering
<item>a powerful language for route filtering
</itemize>
<p>BIRD has been developed at the Faculty of Math and Physics, Charles University, Prague,
@ -91,18 +93,13 @@ Czech Republic as a student project. It can be freely distributed under the term
Public License.
<p>BIRD has been designed to work on all UNIX-like systems. It has been developed and
tested under Linux 2.0 to 2.3, but porting to other systems (even non-UNIX ones) should
tested under Linux 2.0 to 2.4, but porting to other systems (even non-UNIX ones) should
be relatively easy due to its highly modular architecture.
<sect>About this documentation
<p>This documentation can have 4 forms: sgml (this is master copy), html, ASCII text and dvi/postscript (generated from sgml using sgmltools). You should always edit master copy.
<sect>Installing BIRD
<p>On recent UNIX (with GNU-compatible tools -- BIRD relies on GCC extensions)
system, installing BIRD should be as easy as:
<p>On a recent UNIX system with GNU development tools (GCC, binutils, m4, make) and Perl, installing BIRD should be as easy as:
<code>
./configure
@ -112,64 +109,66 @@ system, installing BIRD should be as easy as:
bird
</code>
<p>You can use <tt>./configure --help</tt> to get list of configure
options. Most important (and not easily guessed) option is
<tt/--enable-ipv6/, which enables IPv6 support. You can use
<tt/--with-protocols=/ to produce slightly smaller BIRD, and
<tt/--prefix=/ to install bird somewhere else than
<p>You can use <tt>./configure --help</tt> to get a list of configure
options. The most important ones are:
<tt/--enable-ipv6/ which enables building of an IPv6 version of BIRD,
<tt/--with-protocols=/ to produce a slightly smaller BIRD executable by configuring out routing protocols you don't use, and
<tt/--prefix=/ to install BIRD to a place different from.
<file>/usr/local</file>.
<sect>Running bird
<sect>Running BIRD
<p>You can pass several command-line options to bird:
<descrip>
<tag>-c <m/config name/</tag>
use given config file instead of <file>bird.conf</file>.
use given configuration file instead of <file>$prefix/etc/bird.conf</file>.
<tag>-d</tag>
enable debugging.
enable debug messages and run bird in foreground.
<tag>-D <m/filename for debug log/</tag>
log debugging information to given file.
<tag>-D <m/filename of debug log/</tag>
log debugging information to given file instead of stderr
<tag>-s <m/name of communication socket/</tag>
use given filename for socket for communications with bird client, default is <file/bird.ctl/.
use given filename for a socket for communications with the client, default is <file>$prefix/var/run/bird.ctl</file>.
</descrip>
<p>BIRD writes messages about its work to log files or syslog (according to config).
<chapt>About routing tables
<p>Bird has one or more routing tables, which may or may not be
<p>BIRD has one or more routing tables, which may or may not be
synchronized with kernel and which may or may not be synchronized with
each other (see the Pipe protocol). Each routing table contains list of
known routes. Each route consists of:
<itemize>
<item>network this route is for
<item>network prefix this route is for (consists of networkk address and number of bits forming the network part of the address)
<item>preference of this route (taken from preference of
protocol and possibly altered by filters)
<item>ip address of router who told us about this route
<item>ip address of router we should use for packets routing
<item>IP address of router who told us about this route
<item>IP address of router we should forward the packets to
using this route
<item>other attributes common to all routes
<item>dynamic attributes defined by protocols, which may or
may not be present (typically protocol metric)
<item>dynamic attributes defined by protocols which may or
may not be present (typically protocol metrics)
</itemize>
Routing table maintains more than
one entry for network, but at most one entry for one network and one
one entry for a network, but at most one entry for one network and one
protocol. The entry with biggest preference is used for routing. If
there are more entries with same preference and they are from same
there are more entries with the same preference and they are from the same
protocol, protocol decides (typically according to metrics). If not,
internal ordering is used to decide. You can
get list of route attributes in "Route attributes" section in
filters.
<p>Protocols are connected to routing tables using filters. Routes
that come from network go to the protocol, it then passes them to
<p>Protocols are connected to routing tables through filters. Routes
that come from other routers go to the protocol, it then passes them to
filters, if import filter accepts route, it gets to main routing
table. It is then broadcasted to all other protocols (filtered through
their export filters), which typically send it to the network.
their export filters), which typically send it to other routers.
Filters can alter routes passed between routing tables and
protocols.
@ -178,22 +177,22 @@ protocols.
<sect>Introduction
<p>BIRD is configured using text configuration file. At startup, BIRD reads <file/bird.conf/ (unless
<tt/-c/ command line option is given). Configuration may be changed on user request: if you modify
config file and then signal BIRD with SIGHUP, it will adjust to new
config. Then there's BIRD client,
which allows you to talk with BIRD in extensive way. (Of course you can tell BIRD to reconfigure from BIRDC, you can also tell it to shut down, dump various info etc.). BIRD
writes messages about its work to log files or syslog (according to config).
<!-- fixme: add default values to all places? Where do I learn them? -->
<p>In config, everything on a line after <cf/#/ or inside <cf>/*
*/</cf> is a comment, whitespace is ignored, C-style comments <cf>/* comment */</cf> are also
recognized. If there's variable number of options, they are grouped using
<cf/{ }/ brackets. Each option is terminated by <cf/;/. Configuration
<p>BIRD is configured using a text configuration file. Upon startup, BIRD reads <file>$prefix/bird.conf</file> (unless the
<tt/-c/ command line option is given). Configuration may be changed on user's request: if you modify
config file and then signal BIRD with SIGHUP, it will adjust to the new
config. Then there's the client,
which allows you to talk with BIRD in an extensive way. (Of course you can tell BIRD to reconfigure from BIRDC, you can also tell it to shut down, dump various info etc.).
<p>In the config, everything on a line after <cf/#/ or inside <cf>/*
*/</cf> is a comment, whitespace characters are treated as a single space. If there's a variable number of options, they are grouped using
the <cf/{ }/ brackets. Each option is terminated by a <cf/;/. Configuration
is case sensitive.
<p>Really simple configuration file might look like this: It enables
synchronization of routing tables with kernel, scans for
new network interfaces every 10 seconds and runs RIP on all interfaces found.
<p>Here is an example of a simple config file. It enables
synchronization of routing tables with OS kernel, scans for
new network interfaces every 10 seconds and runs RIP on all network interfaces found.
<code>
@ -218,58 +217,57 @@ protocol rip {
<p><descrip>
<tag>log "<m/filename/"|syslog|stderr all|{ <m/list of classes/ }</tag>
set logging of classes (either all or <cf/{
Set logging of messages having the given (either <cf/all/ or <cf/{
error, trace }/ etc.) into selected destination. Classes are:
<cf/info/, <cf/warning/, <cf/error/, <cf/fatal/ for messages about local problems
<cf/info/, <cf/warning/, <cf/error/ and <cf/fatal/ for messages about local problems
<cf/debug/ for debugging messages,
<cf/trace/ when you want to know what happens on network,
<cf/remote/ for messages about misbehavior of remote side,
<cf/trace/ when you want to know what happens in the network,
<cf/remote/ for messages about misbehavior of remote machines,
<cf/auth/ about authentication failures,
<cf/bug/ for internal bugs
of BIRD. You may specify more than one <cf/log/ line to log to multiple
<cf/bug/ for internal BIRD bugs. You may specify more than one <cf/log/ line to estabilish logging to multiple
destinations.
<!--fixme: mj says explain-->
<tag>debug protocols all|off|{ states, routes, filters, interfaces, events, packets }</tag>
sets global default of protocol debugging options.
Set global default of protocol debugging options.
<tag>filter <m/name local variables/{ <m/commands/ }</tag> define filter. You can learn more about filters
in next chapter.
<tag>filter <m/name local variables/{ <m/commands/ }</tag> Define a filter. You can learn more about filters
in the following chapter.
<tag>function <m/name (parameters) local variables/ { <m/commands/ }</tag> define function. You can learn more
about functions
in next chapter.
<tag>function <m/name (parameters) local variables/ { <m/commands/ }</tag> Define a function. You can learn more
about functions in the following chapter.
<tag>protocol rip|ospf|bgp|... <m/[name]/ { <m>protocol options</m> }</tag> define protocol
instance, called name (or called something like rip5 if you omit name). You can learn more
<tag>protocol rip|ospf|bgp|... <m/[name]/ { <m>protocol options</m> }</tag> Define a protocol
instance called <cf><m/name/</cf> (or with a name like "rip5" generated automatically, if you don't specify <cf><m/name/</cf>). You can learn more
about configuring protocols in their own chapters. You can run more than one instance of
most protocols (like rip or bgp).
most protocols (like RIP or BGP).
<tag>define <m/constant/ = (<m/expression/)|<m/number/|<m/ip address/</tag> define constant. You can use it later in every place
you could use simple integer/ip address.
<tag>define <m/constant/ = (<m/expression/)|<m/number/|<m/IP address/</tag> Define a constant. You can use it later in every place
you could use a simple integer or IP address.
<tag>router id <m/IPv4 address/</tag> set router id. Router id needs to be world-wide
unique. It is usually one of router's IPv4 addresses.
<tag>router id <m/IPv4 address/</tag> Set BIRD's router ID. It's a world-wide unique identification of your router, usually one of router's IPv4 addresses.
<tag>table <m/name/</tag> create new routing table. Default
<tag>table <m/name/</tag> Create a new routing table. The default
routing table is created implicitly, other routing tables have
to be added by this command.
<tag>eval <m/expr/</tag> evaluates given filter expression. It
is used by us for testing.
<tag>eval <m/expr/</tag> Evaluates given filter expression. It
is used by us for testing filters.
</descrip>
<sect>Protocol options
<p>Several options are per-protocol, but all protocols support them. They are described here.
<p>Each routing protocol has its own set of options (see the corresponding sections). These options are common to all protocols:
<descrip>
<tag>preference <m/expr/</tag> sets preference of routes generated by this protocol.
<tag>preference <m/expr/</tag> Sets the preference of routes generated by this protocol.
<tag>disabled</tag> disables given protocol. You can disable/enable protocol from command
line interface without needing to touch config. Disabled protocol is not activated.
<tag>disabled</tag> Disables the protocol. You can change the disable/enable status from the command
line interface without needing to touch the configuration. Disabled protocol is not activated.
<tag>debug <m/setting/</tag> this is similar to global debug setting, except that it only
affects one protocol. Only messages in selected debugging categories will be written to
<tag>debug <m/setting/</tag> Similar to global <cf/debug/ setting, except that it only
affects one protocol. Only messages in selected debugging categories will be written to the
logs.
<tag>import <m/filter/</tag> filter can be either either <cf> { <m>filter commands</m>
@ -355,7 +353,7 @@ pairs <cf><M>type name</M>;</cf>, where each pair defines one local variable. Bo
several statements into one by <cf>{ <M>statements</M> }</cf> construction, that is useful if
you want to make bigger block of code conditional.
<p>Bird supports functions, so that you don't have to repeat same blocks of code over and
<p>BIRD supports functions, so that you don't have to repeat same blocks of code over and
over. Functions can have zero or more parameters, and can have local variables. They
look like this:
@ -1160,5 +1158,5 @@ LocalWords: len ipaddress pxlen netmask enum bgppath bgpmask clist gw md eth
LocalWords: RTS printn quitbird iBGP AS'es eBGP RFC multiprotocol IGP Machek
LocalWords: EGP misconfigurations keepalive pref aggr aggregator BIRD's
LocalWords: OS'es AS's multicast nolisten misconfigured UID blackhole
LocalWords: uninstalls ethernets
LocalWords: uninstalls ethernets IP
-->